Sequence water pumps operate outside the pond. Stays dry, is easy to maintain and draws less wattage than submersible pond pumps resulting in low-cost, trouble-free operation for many years.

8’ power cord with 115V cordset. 1/3 horsepower. Maximum 369 watts.
2" inside threads/3" outside threads outlet with 2" and 3" slip adapters.
No priming pot required.

Flow rate/head pressure: (approximate)
Maximum flow rate = 6800gph
                    @  5’ = 5900gph
                    @10’ = 4850gph
                    @15’ = 3150gph
                    19’ maximum head

Free shipping!

• Out-of-pond construction - NOT submersible!
• Quiet operation
• Ports are 2" FNPT suction and 2" FNPT discharge
• Units are pre-wired with an 8' cord and molded 115V plug
• Housing is molded of high strength, glass filled polypropylene
• 250 cubic inch integrated strainer basket
• Dry run resistant mechanical seals
• Stainless steel hardware is standard
• The motors are TEFC, for excellent protection
• Rebuildable, industrial grade motors
• 3 year limited manufacturer warranty
• Made in the USA